FOOD SAFETY AND INSPECTION SUPERVISOR

Posted date : 30 March 2008

FOOD SAFETY AND INSPECTION SUPERVISOR
Candidate should be Graduate with 4 - 5 years experience in any Food Industry. Experience of working on HACCP (Hazard Analysis and Critical Control Point) regulations that require creating plan to analyzes food safety risks. Capable to handle all environmental and Food Defense tasks independently. Can manage a small processing unit for daily consuming Food Products.

Apply to alwazan@emirates.net.ae
>>>
>>
>

Read More

ORYX - CONTROL SYSTEMS ENGINEER

Posted date : 29 March 2008

CONTROL SYSTEMS ENGINEER
Technical Diploma or Degree in Control Systems/Industrial Instrumentation or Electrical Engineering. Training and certification in Foxboro DCS and Triconix PLC systems or other relevant DCS or ESD systems. A Minimum of 5 years petrochemical experience including 4 years in the following systems; DCS, ESD, Anti-surge, compressor control, Bentley Navada vibration monitoring. Responsibilities include; developing reliability systems and the optimization of control loops; fault finding on problem areas; ensuring system integration is maintained to the required high level and training peers and subordinates in all systems in your field of control.

Apply to oryxgtl.maintenance@gunamandiri.com
>>>
>>
>

Read More

ORYX - MAINTENANCE ENGINEER (STATIC EQUIPMENT)

Posted date : 29 March 2008

MAINTENANCE ENGINEER (STATIC EQUIPMENT)
Mechanical Engineering Degree preferred although HND/B. Tech will be considered an alternative. 6-8 years similar experience in a Petrochemical environment is essential. Experience of GTL technology is a bonus. Experience with pressure vessels and piping. Ensures the integrity of static equipment throughout all process areas. Knowledge SHERQ best practices is also required as is knowledge of a CMMS, preferably SAP.

Apply to oryxgtl.maintenance@gunamandiri.com
>>>
>>
>

Read More

ORYX - MAINTENANCE ENGINEER (ROTATING EQUIPMENT)

Posted date : 29 March 2008

MAINTENANCE ENGINEER (ROTATING EQUIPMENT)
Mechanical Engineering Degree preferred although HND/B.Tech will be considered an alternative. 6-8 years similar experience in a Petrochemical environment is essential. Experience of GTL technology is a bonus. Experience with pressure vessels and piping. Ensures the integrity of rotating equipment throughout all process areas. Knowledge of SHERQ best practices is also required as is knowledge of a CMMS, preferably SAP.

Apply to oryxgtl.maintenance@gunamandiri.com
>>>
>>
>

Read More

ORYX - MECHANICAL TECHNICIANS (STATIC/ROTATING EQUIPMENT)

Posted date : 29 March 2008

MECHANICAL TECHNICIANS (STATIC/ROTATING EQUIPMENT)
Maintenance experience of Reactors, Catalytic Reformers, Furnaces, Fired Heaters, Heat Exchangers, HP Vessels/Drums, Pressure Relieving Devices, Storage Tanks, Piping Components (Valves, Supports, Special Components), HP/MP Steam Boilers, Steam System, Water Treatment Plants, Fin Fan Coolers, Cooling Towers, Industrial Waste Water Treatment Plants, Fire Fighting systems. Experience of Centrifugal Pumps, HP Centrifugal/multi stage Compressors, Centrifugal Blowers/Fans, various Steam Turbines, Gear/Metering pumps, Reciprocating Compressors, Cooling Tower Fans, Shaft Alignment, Mechanical/Gas seal assembly. Require Higher National Diploma in Mechanical Engineering with 8 yrs experience in maintenance , of which 4 yrs in petrochemical industry.

Apply to oryxgtl.maintenance@gunamandiri.com
>>>
>>
>

Read More

ORYX - SENIOR INSTRUMENT TECHNICIANS

Posted date : 29 March 2008

SENIOR INSTRUMENT TECHNICIANS
Experience of flow/level/pressure/temperature transmitters; Fisher-Rosemount Smart version transmitters and Masoneilan/Fisher smart control valve positioners. Experience on control valves (Masoneilan, Fisher, Metso), on/off valves and solenoid operated valves as well as troubleshooting various types of switches, regulators, filters, pneumatic field devices, ESD/DCS and Machine monitoring systems and control. Qualifications and certifications as qualified Instrumentation, Industrial, technician required.

Apply to oryxgtl.maintenance@gunamandiri.com
>>>
>>
>

Read More

Borouge - Maintenance Department Vacancies

Posted date : 28 March 2008

BOROUGE (Olefins, Polyolefins, Polyethylene, Polypropylene) ABU DHABI have vacancies for the following position as attached:

MAINTENANCE DEPARTMENT

1. CONTROL TECHNICIAN
2. MECHANICAL TECHNICIAN
3. TECHNICAL ASSISTANT
4. FIRE/GAS TECHNICIAN
5. ANALYSER TECHNICIAN
6. WAREHOUSE TECHNICIAN
7. PLANNER (E & I )
8. MAINTENANCE CONTRACT ENGINEER
9. SERVICES SUPERVISOR
10. CONTROL ENGINEER
11. ADVANCE PROCESS CONTROL (APC) SPECIALIST
12. PROJECT PLANNER (MECHANICAL)

Apply to borouge.maintenance.jkt@gunamandiri.com
>>>
>>
>

Read More

Borouge - Production Department Vacancies

Posted date : 28 March 2008

BOROUGE (Olefins, Polyolefins, Polyethylene, Polypropylene) ABU DHABI have vacancies for the following position as attached:

PRODUCTION DEPARTMENT

1. PROCESS ENGINEER
2. SHIFT SUPERVISORS
3. OLEFINS PLANT OPERATORS
4. POLYETHYLENE/ POLYOLEFINS PLANT OPERATORS
5. PRODUCT HANDLING PLANNERS
6. PRODUCTION AND COST ANALYST

Apply to borouge.production.jkt@gunamandiri.com
>>>
>>
>

Read More

ADMA OPCO - Process Engineer (Safety/Fire)

Posted date : 23 March 2008

Process Engineer (Safety/Fire)

Knowledge, Skills & Experience
Min 5 years experience in Oil and Gas Industry focusing on process design safety and fire protection of the production facilities and knowledgeable with International standards applicable for process design safety and fire protection requirement. Should have previous experience with safety related studies, Electrical area classification, Fire Protection System Design etc.
Should possess excellent communication, presentation, influencing and behavioural skills, be fluent in English and have good computer and applicable software literacy

Job Purpose/Responsibilities
+ To provide professional technical support for Projects process design safety reviews and appraisals. To assure that all applied process designs safety and fire protection means are adequate as per the requirement of International Standards/Codes of Practices and all ADMA-OPCO and ADNOC guidelines/regulations.
+ To coordinate and control all project safety studies, design/safety reviews and to coordinate with other related divisions/departments. To participate in risk analysis and risk management activities and safety audits and will be reporting to PETL.
+ To mainly lead in specifying the process design safety and fire protection scope for ADMA-OPCO Projects, to prepare all the requirement for key process design safety and fire protection reviews, in coordination with Projects and Assets, to specify the engineering codes and standards to be followed, assure ADMA-OPCO and ADNOC safety and fire protection requirement are well defined and applied, participate and lead HAZOP, HAZID, PHSER…etc and other safety studies, assure proper close out of actions arising from such studies.

Qualification
Degree in Chemical Engineering or equivalent.

Work Cycle
Head office based Job with 42 Working Days Paid Leave

Package
Attractive, Competitive & Negotiable Subject to the outcome of the Interview

Age Range
Up to 55 Years

Location
Abu Dhabi

Expiry Date
16-May-2008

Online apply at http://www.adma-opco.com/Careers/tabid/124/Default.aspx
>>>
>>
>

Read More

ETISALAT - ANALYST/ CONTRACTS - QUALITY ASSURANCE (Job No. 14905)

Posted date : 19 March 2008

Emirates Telecommunications Corporation - ETISALAT,
is looking for highly motivated and well experienced person for the following position to be based in Abu Dhabi.

ANALYST/ CONTRACTS - QUALITY ASSURANCE (Job No. 14905)

Role
Responsible for carrying out contracts review assignments & generate required information in order to support/ enhance the analysis & recommendation of the contracts review reports, review @ finalisation of draft agreements, etc.

Job Requirements:
Graduate/Post Graduate in Commerce/Finance, Law, Contract Mgt/a Certification in Auditing.
Minimum 2 years sound experinece in tendering, contract review & contract finalisation.
Auditing, negotiation, analytical & computer skills is a must.
Experience in Telecom field will be an added advantage.

Salary & Other Benefits:
Attractive salary & benefits will be offered to the right candidate depending on qualification, experience and interview outcome.

For prompt consideration and relevant details, visit our website
www.etisalat-careers.ae and apply online against the relevant position
>>>
>>
>

Read More

ZADCO - HSE ENGINEER

Posted date : 18 March 2008

HSE ENGINEER

1. Synopsis
Sees over a 650000bbls/day crude oil and gas separation and stabilization plant with an average of 1200 employees and a dozens contractors in an Off Shore location in extreme weather conditions.
Develops, implements, and maintains safety, health and environmental programs to manage risk to ALARP, improve performance, ensure regulatory compliance and conformance to OHSAS18001 and ISO14001 requirements.
Process owner for HSE programs in areas such as: Hazard Communication, Incident Investigation, Job Safety Analysis, Risk Register, Near Miss, PTWS, Chemical Approval, Industrial Hygiene, Radiation Safety, Hearing Conservation, Machine Guarding, Confined Space, Respiratory Protection, Pollution Prevention, Waste Management, Environmental Compliance and Reporting, and Safety and Health Training.
Revises and updates programs as needed to maintain a safe, healthful and productive work environment.
Work towards the achievement of HSE targets and objectives using ZADCO HSE KPIs.
Assist the on scene man in-charge in emergency situations
2. Responsibilitiesa) Maintains and control daily Safety practices with regular checks of work sites, ensures that hazards are identified, precautionary measures are taken and provide Safety advice to trades Supervisors.
b) Monitors and controls implementation of all procedures related to the maintenance and effectiveness of safety and emergency equipment and inspect work activities and equipment to ensure correct operation and that procedures are implemented. Ensure that effective records are kept and updated for all equipment under his control.
c) Promote safe working procedures. Supervise and advise on proper application of “Permit to Work” system, arranging for standby of HSE personnel conducting gas and atmospheric tests, participating in actual “Job Watch” as and where necessary; such as hot tapping, mechanical sealing/plugging, entry into dangerous confined spaces and ensuring that all Safety regulations and practices are adhered to.
d) Coordinate and participate in the provision of Safety awareness courses. Prepare programs, arrange participation in conjunction with line management and give lectures using specialized audio visual equipment, hand-out and practical demonstration.
e) Assist and advise the man in-charge at the scene in case of emergency. Check the availability of the safety/emergency equipment. Restrict movement into the affected area to essential personnel only. Provide reports on situations existing at the time of such incidents and present comments on causes and possible remedies.
f) Investigates all industrial and non-industrial incidents and accidents involving personnel, plant and equipment including dangerous occurrences. Analyzes causes, determines future action to reduce these occurrences, prepares and maintains statistical records of all incidents. Prepares periodic reports of incident/accident, highlighting and analyzing problem areas and recommending preventive measures.
g) Develops, discusses and obtains approval for Health, Safety and Environmental programs and procedures at assigned location, and ensure that such procedures and regulations are communicated to all on-site personnel participate in giving specific lectures and talks on such activities. Audit on a continuous basis the effectiveness of such procedures and regulations and present recommendations for improvements.
h) Prepare detailed lists of foreseeable Safety requirements for operational needs, for incorporation into the budget for operating expenses and manpower, maintain adequate stocks of Health, Safety and Environment equipment, clothing, consumables, spare parts and additional safety appliances and equipment, prepare purchase requisitions for the replenishment of existing stock or other special requirements.
i) Studies and comments all engineering designs and drawings pertaining to modifications of plant, equipments, installations, fire protection systems, or projects works to ensure adherence to safety rules, standards and codes of practice, during all phases of implementation on Site.
j) Ensure that all procedural data pertaining to hazardous substances/radio active sources are available and that necessary precautions are observed when transporting, storing and handling.
k) Ensure that the proper record for inspection/maintenance and testing of all safety, fire and lifesaving equipment/systems are maintained and readily available.
1) Ensure the preservation of the environment’s components, characteristics and natural balance; the prevention, reduction or combating of pollution, the preservation of natural resources, and the protection of life forms which exist therein, especially those endangered with extinction, and the development and enhancement of all such components.
m) Promote Waste Management program to collect, store, transport and disposal of waste on sites.
n) Participate for elaboration of occupational health programs with all aspects of the employee’s health and the employee’s relationship with the environment.
Conduct other or similar related duties as directed by line Management.
Participates in the early stages of projects involving new equipment, products, materials, and processes to assure proper consideration of HSE.

3. Minimum Requirements:
B.Sc. Engineering discipline or equivalent
8 years varied experience in Fire & Safety field, including at least 5 years within an offshore oil industry environment or a petrochemical plant

Online apply at http://www.zadco.com/CMS/Careers/Opportunities/tabid/276/Default.aspx
>>>
>>
>

Read More

TASNEE - Various Vacant Position

RG-REE - Rotating Equipment Engineer (Gas/Engineering)
TASNEE-MMR - Millwright Rotating Equipment (Petrochemical/Mechanical)
TASNEE-MMB - Mechanical Maintenance Bagging Machine Specialist (Petrochemical/Maintenance)
TASNEE-MMH - Mechanical Maintenance Seal & Hydraulic Specialist (Petrochemical/Maintenance)
TASNEE-MMS - Mechanical Maintenance Seal & Hydraulic Specialist (Petrochemical/Maintenance)
TASNEE-MME - Mechanical Maintenance Extruder Specialist (Petrochemical/Maintenance)
TASNEE-EMS - Electrical Maintenance Specialist (Petrochemical/Maintenance)
TASNEE-MNS - Maintenance Supervisor Electrical (Petrochemical/Maintenance)
TASNEE-IMS - Instrument Maintenance Specialists (Petrochemical/Maintenance)
TASNEE-MSI - Maintenance Supervisors Instrument (Petrochemical/Maintenance)
TASNEE-MP - Maintenance Planners (Petrochemical/Maintenance)
TASNEE-MS - Material Specialist (Petrochemical/Material)
TASNEE-MEN - Mechanical Engineers (Petrochemical/Engineer)
TASNEE-ENS - Engineering Superintendents (Petrochemical/Engineer)
TASNEE-OP - Operations Specialist (Tasnee/Production)
TASNEE-SS - Shift Supervisor (Tasnee/Production)
TASNEE-PO - Panel Operator (Tasnee/Production)
TASNEE-FO - Field Operator (Tasnee/Production)
TASNEE-UP - Utility Operators (Tasnee/Production)
TASNEE-PE4 - Process Engineer (Petrochemical/Engineer)
TASNEE-PE3 - Process Engineer (Petrochemical/Engineer)
TASNEE-PE2 - Process Engineer (Petrochemical/Engineer)
TASNEE-PE1 - Process Engineer (Petrochemical/Engineer)
TASNEE-PE - Production Engineers (Petrochemical/Engineer)
TASNEE-ME - Mechanical Engineers (Petrochemical/Engineer)
TASNEE-ES - Engineering Superintendents (Petrochemical/Engineer)

Visit www.gunamandiri.com

Read More

ADMA OPCO - Process Engineer (Integration)

Posted date : 17 March 2008

Process Engineer (Integration)

Knowledge, Skills & Experience
Min 5 years experience in Oil and Gas Industry focusing on process engineering and process design of the production facilities and related process engineering/ process design software applications, process design philosophies, process design parameters and process design criteria.
Should have knowledge of HYSYS, PIPESIM, HTX, FLARENET,PHAST etc.
Should possess excellent communication, presentation, influencing and behavioural skills, be fluent in English and have good computer literacy and competent in modelling and software applications

Job Purpose/Responsibilities
To provide professional technical support in process modeling and process simulation across ADMA-OPCO Projects, Assets, CPLD/Reservoir. To assure that any change/deviation in process design can be captured and its impact can be assessed/analyzed and proper mitigation measures can be recommended.
To provide all required support for the process discipline engineer team and for projects in modelling and process simulation activities (process simulations, design software, radiation and dispersion modelling….etc). To coordinate with other divisions/departments, CPLD, PMT and PMC and will be reporting to PETL.
To lead in specifying the need for process simulation (dynamic/steady state simulations), hydraulic calculations, radiation, dispersion, create the simulation models, define the requirements in coordination with reservoir, input the profiles/basic data, and generate the model input files, capable of simulation results interpretation /reporting. To be responsible of controlling the work of project PMC and give support to PMT and Assets at different project stages.

Qualification
Degree in Chemical Engineering or equivalent.

Work Cycle
Head office based Job with 42 Working Days Paid Leave

Package
Attractive, Competitive & Negotiable Subject to the outcome of the Interview

Age Range
Up to 55 Years

Online apply at http://www.adma-opco.com/eingtech5/admacms/Careers/tabid/124/Default.aspx
>>>
>>
>

Read More

ADMA OPCO - Procurement Engineer

Posted date : 17 March 2008

Procurement Engineer

Knowledge, Skills & Experience
5-6 years experience in purchasing / procurement of engineering materials / equipment relating to Oil & Gas / Petrochemical industry with good knowledge of computer operations. Good knowledge of spoken and written English language. Possession of UAE driving licence is preferable.

Job Purpose/Responsibilities
Provide variety of Inventory Management Services related to stock control, procurement and supply of all types of production, engineering, drilling and general materials and equipment required for the operations of ADMA-OPCO. Handles complete replenishment cycle for all types of materials that includes identification of the needs up to issue of Purchase Orders. Responsible for availability of stock materials in right quality and quantity at the right time. Plans work according to a Commitment Plan with established / agreed milestones for major commitments. Prepares documents / presentation and participates in, different levels of Tender Opening Committees and Tender Board meetings (in-house and shareholders).

Qualification
Bachelor Degree in Engineering or equivalent.

Work Cycle
Head office based Job with 42 Working Days Paid Leave

Package
Attractive, Competitive & Negotiable Subject to the outcome of the Interview

Age Range
Up to 55 Years

Online apply at http://www.adma-opco.com/eingtech5/admacms/Careers/tabid/124/Default.aspx
>>>
>>
>

Read More

ENGINEER SPECTRUM ALLOCATIONS

Posted date : 16 March 2008

Key Accountabilities:
Candidate should possess expert level knowledge of the National Spectrum Plan and apply this knowledge in the spectrum allocation function.
Keep abreast of national/ international practices in the area of spectrum allocation and strive towards their implement in the UAE, as appropriate, after discussion with higher management.
Possess expert level knowledge of the Automated Spectrum Management Software and initiate activities towards its maximum utilization.
Propose procedures for spectrum allocation to higher management; initiate efforts for its implementation after due approval.
On a continuous basis, initiate efforts for streamlining the spectrum management process.
Closely supervise the activities of the Assistant Engineers Spectrum Allocation dealing with the allocation process.
Receive application forms duly scrutinized, including completeness of documentation.
Carry out a various spectrum planning analysis based on power, range, antenna, and height propagation model etc. and ensure that the application is valid from this perspective.
Coordinate activities relating to invoicing, forwarding applications to security agencies, updating the database of the allocation, money collection etc.
Coordinate with the Finance Department on issues relating to invoicing, collection and reconciliation.
Deal with public complaints and queries on spectrum allocation and take corrective action, wherever required.
Advise higher management on various issues and development in the area of spectrum allocation.
Advise the higher management on spectrum revenue forecasting.

Qualification and Experience:
Requires Bachelor's Degree or Diploma in telecom Engineering or related discipline.
Minimum 2-3 years of relevant experience in telecom sector at various levels; well conversant with spectrum management related areas.
Requires excellent interpersonal and communication skills (both written and oral). Knowledge of Arabic is preferable but not essential

Interested candidates please send your resumes to anu@abcrecruitment.ae
>>>
>>
>

Read More

ADMA-OPCO Processes and Procedures Team Leader

Posted date : 13 March 2008

Processes and Procedures Team Leader

Knowledge, Skills & Experience
10 years diversified oil & gas experience including project management engineering, planning cost control and estimating with at least 4 years in a supervisory capacity.
Job Purpose :

To develop and be custodian of the Knowledge, Skills, Tools & Techniques required to deliver project goals and objectives in an effective manner utilizing best practices in project management.
To develop & maintain a project governance process that provides proper and efficient control whilst providing sufficient empowerment to individual project teams to motivate delivery.
To maintain & enhance existing Project Management Processes procedures.

Qualification
Bachelor Degree in Engineering.

Online apply at http://www.adma-opco.com/eingtech5/admacms/Careers/tabid/124/Default.aspx
>>>
>>
>

Read More

ZADCO - Mechanical Static Equipment Engineer

Posted date : 13 March 2008

Mechanical Static Equipment Engineer

- Provide Technical expertise to the Company on Static Equipment.
- Provide Engineering support for all projects and studies executed by Engineering and Projects Unit,
- Ensure design optimization and correct codes and standards are utilized in the projects and studies,
- Provide Technical support to the Company Operating Sites, Business Units and Support Units

Annual salary starting from $130,000

Online apply at http://www.zadco.com/CMS/Careers/Opportunities/tabid/276/Default.aspx
>>>
>>
>

Read More

ZADCO - Marine Supervisor (Operations)

Posted date : 13 March 2008

Marine Supervisor (Operations)
Assists the Marine Operations Co-ordinator in marine operations and coordination of all vessels and barge movements including the working of the Stand-by Rescue coverage unit, within offshore areas controlled by ZADCO.

Online apply at http://www.zadco.com/CMS/Careers/Opportunities/tabid/276/Default.aspx
>>>
>>
>

Read More

ZADCO - Marine Standards & Projects Specialist

Posted date : 13 March 2008

Marine Standards & Projects Specialist

To develop and maintain marine standards specific to Company requirements and ensure compliance by ZADCO and Marine Contractors. Provide appropriate functional and technical marine support to ZADCO offshore projects. Provide technical support to Zirku SPM’s and marine operations. Liaise with OPCO’s, professional and governmental organizations as required.

Online apply at http://www.zadco.com/CMS/Careers/Opportunities/tabid/276/Default.aspx
>>>
>>
>

Read More

ZADCO - Mechanical Engineer

Posted date : 13 March 2008

Mechanical Engineer

a. Plans necessary actions to ensure that maintenance and repairs for all Rotating machinery. Static equipment and Lifting equipment are carried out correctly to enable the operational objectives to be met.
Equipment include Gas Turbines, Compressors, Pumps, Diesel Engines, Fans and Blowers, Pressure Vessels, Piping and Valves, Heat Exchangers, Tanks, Cranes and Lifting equipment, Fired Heaters, etc.
b. Identifies particular problems areas and assess the effectiveness of current procedures for handling the problems promptly and efficiently.
c. Assists in developing preventive and routine maintenance schedules to ensure that equipment are maintained as effectively as possible.
d. Creates or modifies procedures as required, recommend changes depending on equipment performance and degree of breakdowns. Liaises with manufacturers where necessary to resolve equipment problems.
e. Diagnoses complex faults, analyzes malfunctions and breakdowns and recommends necessary modification to avoid reoccurrence of complex faults.
f. Receives requests from Sites for repair / overhauls and maintenance problems and equipment modifications. Organizes repairs with local and /or abroad workshops and contractors.
g. Prepares Scope of work for Contractors and review deliverables in engineering /modification/facility change jobs.
h. Handles facility change / facility expansion projects

Online apply at http://www.zadco.com/CMS/Careers/Opportunities/tabid/276/Default.aspx
>>>
>>
>

Read More

ZADCO - Planning Engineer

Posted date : 13 March 2008

Provide technical services to the Maintenance Section and assist in preparation of Maintenance & Section plans & ensure the proper implementation of these plans in a cost effective manner.
Implement Company’s Maintenance policy and Strategies through CMMS.
Implement tasks related to assessing integrity and ensuring that Asset Integrity management system is fully implemented.
In coordination with sites various departments prepare the annual Capital & Operating Budgets, handle Service Orders & Job Tickets, monitor commitments and generate regular reports to control Operating costs.

Online apply at http://www.zadco.com/CMS/Careers/Opportunities/tabid/276/Default.aspx
>>>
>>
>

Read More

ZADCO - Fire Master

Posted date : 13 March 2008

Fire Master
Control the activities of the fire-fighting team both on station and at the scene of fires or emergencies. Organize and participate in fire training and emergency drills, ensuring the maintenance, repair and testing of all fire-fighting and emergency equipment and control and participate in job watch activities; and provide fire fighting coverage for airport.

Online apply at http://www.zadco.com/CMS/Careers/Opportunities/tabid/276/Default.aspx
>>>
>>
>

Read More

ZADCO - Process Engineer

Posted date : 13 March 2008

Process Engineer

Bachelor’s degree in Chemical Engineering from a reputed international university with minimum of 10 years experience in the oil & gas industry of which at least 5 years related to upstream offshore oil and gas. The engineer will be a member of the central engineering group which serves Company’s various Business Units. Must be experienced in leading a multi-discipline engineering team in conducting conceptual and optimisation studies, preparation of conceptual / Basic Process Design / Front End Engineering, safety & design reviews, Hazops; provide engineering support to detailed design, projects and cost & planning groups. Must also have experience in preparing scope of work for consultants to carry out conceptual studies, conceptual design, FEED; manage studies and design by consultants; evaluation of bids for engineering services, equipment, etc. Should be fully conversant with design codes and standards related to the oil & gas industry and simulation tools such as Hysys, Pipesim, Pipenet, Pipephase, Flowmaster, etc including general process engineering softwares. Experience in Value Engineering & Project Risk Assessment workshops and HSE related reviews such as PHA’s, PHSER’s would be an added advantage.
Annual salary starting from $153,000

Online apply at http://www.zadco.com/CMS/Careers/Opportunities/tabid/276/Default.aspx
>>>
>>
>

Read More

OPERATIONS GEOLOGIST

Posted date : 13 March 2008

OPERATIONS GEOLOGIST
Candidate has to carry out geological and well sites activities, monitoring drilling operations and data gathering on the assigned well, ensuring correct and initial interpretation of data and monitoring and controlling the activities of contractors, so that they meet programmed schedule and quality requirements as well as rig safety issue. To operate and perform within leading and supporting company's safety and environment protection policy.

Major roles:
Provide an on-site geological analysis during the drilling of the well to support the well programme in meeting its geological objectives. This includes collecting and describing cuttings and cores, advising drilling personnel at well site of expected lithological sequence, pay zones, casing depteh, rate of penetration and possible hazardous intervals ensure the execution of logging programmes, interpretation of lithology and drilling fluid condition.
Prepare geological well forecasts and structural prediction through interpretation and anlysis of wire line logs.geological maps and core data, and prepares Final Well Report related to his assignment for supervisor's review.

Candidate should have B.Sc in Geology. Must have min 5 years exp in well-site geology, sub-surface geology and logging.

Candidates who are interested in the above positions please forward your resumes to anu@abcrecruitment.ae
>>>
>>
>

Read More

GEOPHYSICIST

Posted date : 13 March 2008

GEOPHYSICIST
This position required to carry out detail structural interpretation for reservoirs and non-reservoirs intervals including high velocity channels and anomalies on 3d seismic data. Detail fault interpretation using 3d volume attributes. Conduct fault throws and fault seal analysis studies. Build velocity model and depth surfaces. Reservoir property mapping (porosity, facies) in seismic resolution using post-stack data. Fracture mapping using post-stack attributes (dip, azimuth, coherency and curvature). Co-ordinate advance studies, with service companies and or shareholders, such inversion, detail fracture analysis and pre-stack depth migration processing to improve seismic imaging. Access and assess advance geophysics technologies for detail reservoir characterization and monitoring.

Qualifications:
Candidate should have Bachelors or Masters Degree in geophysics with 15-20 years of industry experience in 2D and 3D Seismic data to solve complex problems. Good communication skills and technical report writing skills in English is necessary.

Candidates who are interested in the above positions please forward your resumes to anu@abcrecruitment.ae
>>>
>>
>

Read More

COST ESTMIMATING ENGINEER

Posted date : 13 March 2008

COST ESTMIMATING ENGINEER
Degree in Engineering or equivalent. Minimum 12 years of experience in the Upstream Oil/Gas Industry on engineering and project management activities on a wide range of projects across all stages, preferably with both operators and contractors. At least 5 years experience in cost estimating and or bid preparation activities in hand-on role utilizing current industry best practices methodologies.

Send your CV to manpower@alshoumoukh.com
>>>
>>
>

Read More

PROCESS CONTROL ENGINEER

Posted date : 13 March 2008

PROCESS CONTROL ENGINEER
Degree in Engineering with minimum 5-7 years of experience in Oil & Gas/Automation Engineering companies in the field of process automation /control. Successful candidate would be responsible for preparing, analyzing and evaluating process control studies, identify cause, cure and prepare full investigation reports. Handling Process control issues, participating in technical studies/surveys etc.

Send your CV to manpower@alshoumoukh.com
>>>
>>
>

Read More

G I S ENGINEER

Posted date : 13 March 2008

TANQIA FZC, State-of- the-art utility company in Fujairah (UAE) requires:

G I S ENGINEER
+ Degree in Engineering with knowledge related to utility business.
+ Qualifications in IT support software development preferred.
+ Minimum 5 Years experience in GIS related industry managing medium to large installation.
+ Will be fully responsible for the operation & maintenance of GIS and related systems.
+ Should be able to provide expertise in review and assessment of the system performance.
+ Proficient in English with Arabic an added advantage.
+ Attractive package offered.

Interested candidates may send their CV with a recent photograph to: recruitment@tanqiafzc.ae
>>>
>>
>

Read More

Applications Engineer EDMS

Posted date : 8 March 2008

Applications Engineer EDMS

Please be advised that we have an urgent requirment for the services of an Applications Engineer EDMS for an Oil & Gas Company based in Abu Dhabi, UAE We highly appreciate receiving CVs from your side as soon as possible mentioning;
1 - Salary Expectations
2 - Mobilization period incase you will be selected for the post.
3 - Current location & Updated contact details
4 - Suitable time of the day to have a telephonic interview
5 - Availability of "NOC" (Incase you are working in UAE) from your current employer Yes/No?
6 - DOB

Please send your CV to a.anangs@gmail.com

Detail Job:
+ Integrated all drawings & technical documents under one Engineering Documents Management System
+ Manage all drawing, Technical documents, & vendor manual
+ Enable all department to access all technical information for oilfield plant and facilities
+ Evaluate & recomended the latest technology of EDMS covering hardwares & softwares
+ Perform data analysis on SPF database using SQL
+ Use SPE, SPI, & SPPID

Minimum Requirements
+ B.Sc in Engineering or Computer Science
+ Minimum 12 years experience covering the fields of computer system, networking applications development & strategic planning, preferable in the oil industry
+ Good experience in the field EDMS
+ Expert knowledge of intergraph SmartPlan Foundation base on the Scheme Object Model
+ Knowledge of SmartPlan Enterprise Technology
+ Ability to integrate SPF to others application via web technologies
+ Ability to develop/support application on Oracle 9i & Oracle 10g
+ Proficient : Visual Basic 6.0; Visual Basic.Net; VBA, ASP, ASP NET; Net Web Services; SQL, HTML, & DHTML
>>>
>>
>

Read More

RASGAS - PETROPHYSICS SPECIALISTS

Posted date : 4 March 2008

RASGAS - PETROPHYSICS SPECIALISTS

Role:
Responsible for performing petrophysical activities associated with active field development including evaluation, planning, selection and supervision of contract petrophysical support personnel, off-shore and on-shore wire line logging activities, log analysis, maintenance of petrophysical database.

Requirements:
A degree in petrophysics or geosciences and at least 10 years' experience in carbonate reservoirs, and familiarity with offshore operations.

Online apply at http://www.rasgas.com/rgr/
>>>
>>
>

Read More

RASGAS - CAD OPERATOR

Closing date : 7 April 2008

RASGAS - CAD OPERATOR

Role:
• Provides multidiscipline drafting support of engineering drawings. • Supports Project Engineers with the development of drawings for new Capital Projects. • Supports drawing development through the MOC (Management of Change), EWR Engineering Work Request), and CWR (Cad Work Request) process. • Maintains expert software knowledge with RasGas Drafting platforms. This includes Microstation, PDS 2D, SmartPlant P&ID, and SmartPlant Instrumentation software. • Follows industry drafting standards and specific company standards to maintain a consistent set of drawings for both the onshore and offshore facilities. • Support the development of sophisticated database management techniques to track all types of documents and drawings containing plant information in various electronic formats and convert these products into an Intergraph format that is consistent with the company standards.

Requirements:
• Technical College Design/Drafting diploma. • Minimum of 5 years experience in Design/drafting in the Petroleum industry. • Expert working knowledge of all design and drafting components involving process systems in the Oil and Gas Petroleum industry. • Expert working knowledge of Bentley Microstation CAD software. • Good working knowledge of Intergraph’s PDS 2D P&ID, SmartPlant P&ID, and SmartPlant Instrumentation software • Good organizational skills • Very good written and spoken English.

Online apply at http://www.rasgas.com/rgr/
>>>
>>
>

Read More

RASGAS - CONTRACTS ENGINEER

Closing date : 4 April 2008

RASGAS - CONTRACTS ENGINEER

Role:
To provide Contracts Engineering services in accordance with the company’s policies and procedures and produce documentation to allow the effective development and implementation of contracts to support the Company’s onshore and offshore activities. • Carry out the Contracts Engineering duties section within the Procurement Department, consistent with Company Policies and Company business objectives. • Carries out Planning and scheduling of the Contracts Engineering Sections. • Works in a Team to identify and report on Contracts risk assessment and recommends Project Engineering Strategies to mitigate any such contractual risk exposure to RasGas. • Responsible for leading and identifying various options and translating customer’s requirements into the most appropriate tendering strategies to meet the needs of sponsoring department. • Maintain the compliance of the Corporate Procurement Manual including Contracts Section Quality Control Process and reports on company wide customer feedback loops. • Manage the tender development and tender evaluation process including on and offsite tender clarification meetings with contractors where necessary. • Counsels sponsoring departments on specific Terms Conditions for customised Contracts. • Plans, co-ordinates and leads the Tender award and contract formulation activities. • Works in a team to provide contractual guidance on Post Award Activities such as Change-orders, contractor claims, warranty claims and claims resolution, Contract Close-out process and approvals. • Develops and implements tendering strategies, Contract formulation including Technical Scope targeting Engineering specifications, Contractor-Company joint responsibilities, contractor performance indicators, EHS requirements, quality & compliances, Compensation models, risk mitigation. • Develops and implements tender planning/scheduling to ensure critical path tender and award milestone activities are achieved. Such projects tender planning process shall include the use of Project Mgmt. tools, (M.S-Projects) Progress reporting and contract award activities. • Works in a Team to carry out Pre-qualification and feasibility exercise and provide input to sponsoring dept. • Liaise and co-ordinate with Legal and Finance Departments when required in relation to contractual and commercial recommendations. • Attend LTC meetings along with Tender Evaluation team and provide Contractual guidance. • Adherence to budget requirements and forecasting any variations.

Requirements:
• Bachelor of Science in Engineering, quantity surveying, or Professional Associate Member of an internationally recognized Institution of Cost engineers, or quantity surveying. • Minimum 8 years contracts administration experience in the oil & gas industry of which 2 years in a supervisory role with major international Contractors or Clients. • Related experience shall include some exposure project management skills, financial planning and budgeting. • Knowledge of and some experience in a wide range of administrative & operations services incorporating international standard forms of contract. • Ability to work as both a team member and also a team leader. • Excellent computer literacy with particularly high proficiency in MS Word, Excel, PowerPoint, Projects, and Outlook. • Knowledge of international standard forms of Projects /Construction Engineering / Operating Company Maintenance Contracts including claims resolution and mitigation • Must be able to demonstrate some experience in the application of Quality Management principles under ISO 9000 Series or British/European Standards. • Skills to develop contract presentations • Good interpersonal skills and must have experience of working with and managing a multicultural, multinational workforce, preferably within the Gulf region. • Must be fluent in written and spoken English. • Skill in organizing resources and establishing priorities • Able to demonstrate excellent communication, presentation and facilitation skills. • Excellent planning, analytical and problem solving skills.

Online apply at http://www.rasgas.com/rgr/
>>>
>>
>

Read More

ADGAS - Fabrication Supervisor

Posted date : 5 March 2008

Fabrication Supervisor

· Supervises, Co-ordinates and directs the Central Workshops Fabrication Section, which includes pipe fitting, welding and boilermaking activities. Ensures all work are carried out safely and according to safe working requirements as directed by the Work Permit System.
· Supervises and directs the activities of assigned personnel in the Fabrication Section. Performs supervisory function at the level established by Management.
· Receives work orders and determines priorities based on work schedules and commitments, if necessary visits work site to determine extent of work and other requirements, obtains appropriate materials, special tools and equipment as required, assign craftsman to the various jobs and provides necessary technical instructions.
· Checks daily the work progress and inspects completed work to ensure conformity with crafts standard.
· Inspects work performed by contractors for compliance with established specifications and standards.
· Liaises with ADGAS and ADMA-OPCO Inspection Engineers regarding quality control, inspection and testing of all welding and pipe fabrication.
· Arranges for and ensure that tools, equipment, spare parts and other materials are available for field and Central Workshops’ maintenance work at all times and initiates list of spare parts and materials for replenishment of stock.
· Ensures proper use of new as well as reconditioned material and good housekeeping practice in Central Workshops and field.
· Maintains appropriate records of maintenance activities and ensure that charges for time and material are properly made to the various work order accounts.
· Provides training and development to employees under his direction (with emphasis on UAE National) and assess their progress, that includes on-the-job training, counselling and proper work delegation.
Uses computerised Maintenance Management Systems (SAP) to carry out his duties.

Qualification:
Secondary Technical Certificate (12 years) or equivalent.
· 8 years related experience in the oil and refining or petrochemical industry, 3 years of which should be in a maintenance workshop.
· Good spoken English. Ability to write technical reports with minimum guidance.

Work Cycle:
35 working days on Das Island , followed by 28 days of leave to point of origin

Package:
. Salary is negotiable
· Round trip economy class air fares to point of origin for each rotation
· Messing and bachelor accommodation are provided free of charge on the Island
· Excellent sports/recreation club facilities on the Island

Online apply at http://www.adgas.com/Default.aspx?tabid=212
>>>
>>
>

Read More

ADGAS - Technical Trainer (Electrical)

Posted date : 5 March 2008

Technical Trainer (Electrical)

Responsible for the development and implementation of training and systems to support the ADGAS Competence Development Programme for Engineers, and Technicians. He will be required to assist in the design and production of suitable training support material to ensure that the Competence Development Programme Quality Standards are maintained and that there is uniformity in the delivery of high standards of training which includes both ‘on and off the job training’. The successful candidate should also be able to:
· Coach the Developees (Engineers and Technicians) in both theoretical and practical activities as defined within the ADNOC/ADGAS Competency frame work and plan and follow-up the work based activities appropriate to the development of their skills and knowledge.
· In collaboration with other Training Centre staff, design and produce a comprehensive system for ensuring that the practical competence of the workforce is developed to the required standards
· Deliver ‘short sharp’ practical courses which emphasis the acquisition of practical skills
· Design, produce and deliver practical material for remedial work as identified by GAP analysis
· In close cooperation with the Developees and the input of Line team members and other Training Centre staff, develop and produce Personal Development Plans, Service Level Agreement and Personal Development Records for Developees.
· Maintain good working relationship with other Training Centre staff
· Observe and monitor competence checks of individual Developees
· In consultation with Line closely monitor the rotation of Developees and the effectiveness of the training
· Track the progress of Developees and produce reports as required.

Qualification:
· B Sc. or equivalent
· Completion of an approved programme of practical training, such as Apprenticeship or Professional Institution/ Engineering Training Body / Armed Services / accredited training programme and / or SVQ/NVQ Accreditations.
· Very good standard of written and spoken English Language
· Five years experience of the Oil and Gas Industry, with a further six years related industrial experience
· Must be computer literate
· Good interpersonal skills

Work Cycle:
5 / 2 work cycle, 38 days annual leave + 14 days public holidays

Package:
· ADGAS equivalent Grade 13
· Normal expatriate benefits, dependent on marital status and number of children
· Free accommodation and meals etc. on Das Island
· Attractively subsidized sports/recreational club membership on Das and mainland

Online apply at http://www.adgas.com/Default.aspx?tabid=212
>>>
>>
>

Read More

ADGAS - Technical Trainer (Mechanical)

Posted date : 5 March 2008

Technical Trainer (Mechanical)

Responsible for the development and implementation of training and systems to support the ADGAS Competence Development Programme for Engineers, and Technicians. He will be required to assist in the design and production of suitable training support material to ensure that the Competence Development Programme Quality Standards are maintained and that there is uniformity in the delivery of high standards of training which includes both ‘on and off the job training’. The successful candidate should also be able to:
· Coach the Developees (Engineers and Technicians) in both theoretical and practical activities as defined within the ADNOC/ADGAS Competency frame work and plan and follow-up the work based activities appropriate to the development of their skills and knowledge.
· In collaboration with other Training Centre staff, design and produce a comprehensive system for ensuring that the practical competence of the workforce is developed to the required standards
· Deliver ‘short sharp’ practical courses which emphasis the acquisition of practical skills
· Design, produce and deliver practical material for remedial work as identified by GAP analysis
· In close cooperation with the Developees and the input of Line team members and other Training Centre staff, develop and produce Personal Development Plans, Service Level Agreement and Personal Development Records for Developees.
· Maintain good working relationship with other Training Centre staff
· Observe and monitor competence checks of individual Developees
· In consultation with Line closely monitor the rotation of Developees and the effectiveness of the training
· Track the progress of Developees and produce reports as required.

Qualification:
· B Sc. or equivalent
· Completion of an approved programme of practical training, such as Apprenticeship or Professional Institution/ Engineering Training Body / Armed Services / accredited training programme and / or SVQ/NVQ Accreditations.
· Very good standard of written and spoken English Language
· Five years experience of the Oil and Gas Industry, with a further six years related industrial experience
· Must be computer literate
· Good interpersonal skills

Work Cycle:
5 / 2 work cycle, 38 days annual leave + 14 days public holidays

Package:
· ADGAS equivalent Grade 13
· Normal expatriate benefits, dependent on marital status and number of children
· Free accommodation and meals etc. on Das Island
· Attractively subsidized sports/recreational club membership on Das and mainland

Online apply at http://www.adgas.com/Default.aspx?tabid=212
>>>
>>
>

Read More

ADGAS - Civil Structural Design Draftsman

Posted date : 5 March 2008

Civil Structural Design Draftsman

· Designs, develops and prepares Drawings from original sketches, and drawings of major equipment layouts, structural layouts and site dimensions.
· Produces final civil & structural fabrication and erection drawings, including bills of material, on final completion/commissioning, does final “As Built” for all related documents as per site checks.
· Uses computer CAD software to draw up detailed drawings of various features based on design calculations and details prepared either by himself or concerned support Engineer. This will include site plans, civil & steel construction drawings, foundations, temporary & permanent supports, piping layouts, material take off, updates and prepare “As-Built” drawings.
· Liaises with Senior Draftsman, Support Engineers and other Divisions on drafting work requirements, to clarify and obtain informations, and extents of work requirements.
· Prepares the bills of materials related to drawings as required according to Adgas engineering specifications and standard procedures for material take off
· Checks drawings produced by other Design Draftsmen, and ensures that the quality of work produced is acceptable and in conformity with the Company’s standards, codes and practices, and that they are logical and function able.
· Carries out surveying, site measurements, layouts and routing of new pipelines, equipments, structures, and pipe supports.
· Carries out other similar or related duties assigned such as assisting in training U.A.E developees, preparing charts and reports.

Qualification:
Academic degree in Civil / Structure or equivalent, minimum 8 years experience in Civil / Structural with Gas/oil industry.
Candidates should have a thorough working knowledge in designing / updating Structural Layouts / Piping Layouts / Major Equipment Layouts Civil Structural Details and fabrication drawings, utilizing AutoCAD and GTX Raster software, preference shall be given to those who are well aware about Microstaion, & PDS.
Working knowledge in Mechanical/Equipment tagging system to identify and/or differentiate various types of line numbering and Equipment tags is also required.
Candidate should be familiar with relevant codes, standards and industry practices, SPF database update, and SAP Production module, and ability to work in a team orientated environment

Work Cycle:
5 days working on Das Island 2 days off in Abu Dhabi + 38 days Annual leave

Online apply at http://www.adgas.com/Default.aspx?tabid=212
>>>
>>
>

Read More

ADGAS - HSE Advisor (Projects)

Posted date : 5 March 2008

HSE Advisor (Projects)

Enhances the coordination and management of health, safety & environment with the Project and Engineering Management Teams to achieve Project/ Major Modifications goals and objectives in accordance with contractual and regulatory HSE requirements.
Ensures that engineering designs, drawing and project deliverables comply with ADGAS HSE rules and regulations, ADNOC HSE Codes of Practice, local and international standards and codes of practices.
Ensure that projects executed meet the ADNOC criteria for HSE requirements during pre-feed, FEED and Detail Engineering phases.

Main Duties:
Responsible for providing guidelines and technical inputs for preparing the Projects HSE plans.
Provides HSE input to technical design and procedure proposals.
Ensure that all designs, drawings and major modifications to plant and projects work comply with ADGAS, ADNOC Codes of Practice, Local and International HSE standards.
Participates and if necessary leads hazards and operability studies (HAZOP). Carries out qualitative and semi-quantitative risk analysis as and when required.

Reviews and provides guidelines and technical input to projects/ major modifications HSEIA.
Reviews and participate in the philosophy, design and specification of fire detection and protection systems for new projects and major modifications.
Organizes and leads the project HSE reviews (PHSER’s) for all projects and major modifications
Periodically reviews each project HSE action tracking register to ensure that the findings of all HSE studies and reviews have been effectively recorded and all actions are adequately addressed.

Participates in all HSE studies such as, hazard identification (HAZID), Hazard Analysis (HAZAN), Environment Hazard Identification (ENVID), Simultaneous Operations (SIMOP), Safety Integrity levels (SIL), constructability studies and any other study having impact on HSE.

Keeps close monitoring and follow-up the implementation of all HSE requirements for each project and major modification.
Proposes and provides technical expertise in developing and updating projects COMAH report, QRA and HSE Plan and follow-up on their implementation.
Participates in investigation of accidents that occur on project construction sites.
Reviews statement of requirements for all new projects and major modifications.
Participates in pre-commissioning/ commissioning activities of projects and major modifications.
Participates in planning ADGAS Emergency and Crisis Management Exercises.
Keeps close coordination with HSE Project Site personnel and conducts regular Advanced Safety Audits (ASA).

Provides HSE input during bidder’s pre-approval and technical evaluation processes.
Reviews and provides input to all Documents related to Projects/Major modifications.

Qualification:
· B.Sc. in Safety Engineering or Chemical Engineering
· 15 years experience in oil and gas companies of which minimum 10 years in Project HSE Management.
· Computer literate, fully proficient in Excel, MS Project, PowerPoint, etc.
· Excellent knowledge of written and spoken English.
· Excellent knowledge of HSE software’s

Work Cycle:
Abu Dhabi based 05/02 + 42 working dayes paid annual leave (with frequent visits to Das Island as per work requirements)

Online apply at http://www.adgas.com/Default.aspx?tabid=212
>>>
>>
>

Read More

GRAPHIC DESIGNERS (Ref # EDT07/12/07)

Posted date : 4 March 2008

GRAPHIC DESIGNERS (Ref # EDT07/12/07)
A degree / diploma in Grahics with a minimum of 5 -7 yrs of proven experience is essential. Should be able to create and implement ideas in Graphics, presentation, designing and concept imaging.

Interested candidates may forward their CVs quoting the Ref No. to: recruit@khaleejtimes.com

Candidates who qualify for the above mentioned positions only need apply with the ref. no. given for specific positions. Only short-listed candidates shall be intimated, for all positions detailed CVs with the latest passport size colour photograph must be sent through E-mail as mentioned.

The compensation and benefits offered for the said positions will be the best on par with the industry, commensurate with qualification and experience. Excellent career prospects shall be provided to the deserving candidates.
>>>
>>
>

Read More

SENIOR PHOTOGRAPHERS / PHOTOGRAPHERS (Ref # EDT05/12/07)

Posted date : 4 March 2008

SENIOR PHOTOGRAPHERS / PHOTOGRAPHERS (Ref # EDT05/12/07)
Professional qualification with a minimum of 3-5 yrs of experience in the field of photography is essential. Should be able to produce excellent master clicks reflecting quality and natural effects. Highly motivated indIvidual pro-active and adaptable to innovations is preferred for the post.

Interested candidates may forward their CVs quoting the Ref No. to: recruit@khaleejtimes.com

Candidates who qualify for the above mentioned positions only need apply with the ref. no. given for specific positions. Only short-listed candidates shall be intimated, for all positions detailed CVs with the latest passport size colour photograph must be sent through E-mail as mentioned.

The compensation and benefits offered for the said positions will be the best on par with the industry, commensurate with qualification and experience. Excellent career prospects shall be provided to the deserving candidates.
>>>
>>
>

Read More

ELECTRONICS ENGINEER (Ref # TEC01/12/07)

Posted date : 4 March 2008

ELECTRONICS ENGINEER (Ref # TEC01/12/07)
A Graduate in Electronics Engineering with 4 - 6 yrs of experience in the field of Electronics and exposure in working in Man Roland Newspaper press. Should be able to plan, coordinate and supervise all maintenance activities and systems. To ensure compliance / reliability.

Interested candidates may forward their CVs quoting the Ref No. to: recruit@khaleejtimes.com

Candidates who qualify for the above mentioned positions only need apply with the ref. no. given for specific positions. Only short-listed candidates shall be intimated, for all positions detailed CVs with the latest passport size colour photograph must be sent through E-mail as mentioned.

The compensation and benefits offered for the said positions will be the best on par with the industry, commensurate with qualification and experience. Excellent career prospects shall be provided to the deserving candidates.
>>>
>>
>

Read More

APPLICATION SUPPORT SUPERVISOR (Ref # IT02/12/07)

Posted date : 4 March 2008

APPLICATION SUPPORT SUPERVISOR (Ref # IT02/12/07)
A Graduate in Computer Science/ Printing Technology with 3 - 5 yrs of experience in applications like Adobe InDesIgn / Photoshop / PageMaker / QuarkXPress. Should have exposure to Newspaper Industry specifically to Editorial / Advertising requirements.

Interested candidates may forward their CVs quoting the Ref No. to: recruit@khaleejtimes.com

Candidates who qualify for the above mentioned positions only need apply with the ref. no. given for specific positions. Only short-listed candidates shall be intimated, for all positions detailed CVs with the latest passport size colour photograph must be sent through E-mail as mentioned.

The compensation and benefits offered for the said positions will be the best on par with the industry, commensurate with qualification and experience. Excellent career prospects shall be provided to the deserving candidates.
>>>
>>
>

Read More

INVENTORY CONTROLLER - Automobile Parts

Posted date : 4 March 2008

INVENTORY CONTROLLER - Automobile Parts
Graduates in Commerce with 5 years experience in planning and inventory control purchasing and tracking) in a computerized environment. Computer literate with excellent communication skills. Should have at least 3 years experience in automotive industry.
Role:
Follow up continuously with the supplier to ensure that the order is received on agreed date.
Coordinate with the Freight forwarders for the documentation and landing of the consignment.
Handle clearing of the consignment from port, including inspection of the parts, for specification compliance and damage if any.
Produce the stock list and intimate the Counter to facilitate bookings with customers / mechanics.
Ensure that all safety, security and health care measures are followed inside the store to avoid any mishap.

Apply to ranjini@abcrecruitment.ae
>>>
>>
>

Read More

INTERIOR AND EXHIBITION DESIGNER

Posted date : 2 March 2008

INTERIOR AND EXHIBITION DESIGNER
REF: TA 358/08
The Credentials:
+ Bachelor's degree from an accredited school of design.
+ 2 years experience working in a similar industry; interior and/or exhibition stand design
+ Proficient in AutoCAD, 3D MAX, Creative Suite, Photoshop and various types of computer-aided design programs.
+ Experience with all phases of design and construction of interior space and/or exhibition stands.

Interested candidate, please apply to:
technicalappointments@falconhuntersinternational.ae
>>>
>>
>

Read More

QUARRY FOREMAN

Posted date : 2 March 2008

Musandam Rock LLC is limestone quarry in Khasab, Oman.
In order to keep up with our continuous growth we are now recruiting.

Experienced QUARRY FOREMAN:
At least 10 years of relevant experience in Quarrying
Familiar with excavator/wheelloader/bulldozer/dumper operations
Able to organize several mining machines in an orderly and safe manner
Able to autonomously start-up a shift on the directions of the Quarry superintendent
Report when an activity is finished and liaise with he quarry superintendent for reorganizing the equipment

Working day-night shift (shift basis)
1 day off per 2 weeks
6 months working/1 month unpaid leave
Competitive salary
Food and lodging provided by the company

Please send your CV to Fax No. 00968 26730701 or
E-mail to: hr1@musandamrock.com
Contact Info: 00968 26731883 Mr. Edward Uy (00968 99252016)/Ms. Glenda Casido (00968 99366392)
>>>
>>
>

Read More